L-type Straineres　【Type LISⅡ】　ストレーナ・Cyclone (for fluid)　アクセサリー　Osaka Sanitary Co., Ltd.
Home >> Products >> Accessories >> Strainers,Cyclone For Fluid >> L-type Straineres　【Type LISⅡ】

L-type Straineres　【Type LISⅡ】


     


※Standard surface finish : buff finish(#320 to #400)for internal surface / shot blast finish for external surface
※Standard fitting: Ferrule,Screw
※Care about pressure loss etc. is needed for except standard production.


Nom.size ID A B C E Size of gasket Filter are(cm2) Mass kg
1.0S 23 273 55 164.5 50.8 2.0S 133 1.5
1.5S 35.7 329 70 207 63.5 2.5S 260 2.1
2.0S 47.8 390 82 263 76.3 3.0S 436 3.1
2.5S 59.5 455 105 318 89.1 3.5S 662 4.3
3.0S 72.3 503 110 375 101.6 4.0S 933 5.0
3.5S 85.1 568 125 430 114.3 4.5S 1289 -
4.0S 97.6 638 155 492 139.8 5.5S 1729 11.4

Mesh selection（Standard）
※Since specifications differ except standard, please contact us
Mesh Aperture size(μm) M.W.Press(MPa)
20 870 0.7
40 405
60 253
80 197
100 154
150 109
200 77
400 33
●Main material : SUS316L
Filter material : SUS316
O-ring material : FEP coating silicone rubber
Gasket material: Silicone rubber
●Standards : Sintered filter

Standard
Option
Punching&Sintered Wire net Notch wire Punching Etching

（1）Preparation of mesh filters other than specified in the above is not available.
（2）Inappropriate backwashing may damage filters. Please follow the Instruction Manual accordingly.
（3）Please refer to the mesh selection to obtain data for operational differential pressure.
（4）Ensure that the flow direction indicated in the drawing be followed unless otherwise specified.
（5）L-type strainer filters come in sintered metal mesh with punching treatment.
（6）Y-type strainer filters are treated by punching.
（7）Depending on the specifications, it may be necessary to make fine adjustments such as changing the diameter of the punched hole.
（8）The main body material is SUS316L, and mesh material is SUS316.