Tube Straineres　【Type TS】　ストレーナ・Cyclone (for fluid)　アクセサリー　Osaka Sanitary Co., Ltd.
Home >> Products >> Accessories >> Strainers,Cyclone For Fluid >> Tube Straineres　【Type TS】

Tube Straineres　【Type TS】


     


※Standard surface finish : buff finish(#320 to #400)for internal surface / shot blast finish for external surface
※Standard fitting: Ferrule,Screw
※Care about pressure loss etc. is needed for except standard production.


Nom.size ID A B L Size of gasket Filter are(cm2) Mass kg
1.0S 23 101.6 134 200 4.0S 188 2.4
1.5S 35.7 101.6 134 285 4.0S 365 2.8
2.0S 47.8 114.3 145 350 4.5S 458 3.7
2.5S 59.5 139.8 173 400 5.5S 547 6.3
3.0S 72.3 139.8 173 450 5.5S 697 7.1
3.5S 85.1 165.2 201 500 6.5S 876 10.5
4.0S 97.6 165.2 201 600 6.5S 1117 -


Mesh selection（Standard）
※Since specifications differ except standard, please contact us
Mesh Aperture size(μm) P.D.Press. (MPa)
20 920 0.2
30 557
40 415
50 318
60 273 0.1
80 198
100 154
150 109 0.05
200 77
300 45
400 34
●Main material : SUS316L Filter
Material : SUS316
Gasket material: FKM

Standard
Option
Wire net Notch wire Punching Punching&Sintered Wirre net Etching

（1）Preparation of mesh filters other than specified in the above is not available.
（2）Inappropriate backwashing may damage filters. Please follow the Instruction Manual accordingly.
（3）Please refer to the mesh selection to obtain data for operational differential pressure.
（4）Ensure that the flow direction indicated in the drawing be followed unless otherwise specified.
（5）L-type strainer filters come in sintered metal mesh with punching treatment.
（6）Y-type strainer filters are treated by punching.
（7）Depending on the specifications, it may be necessary to make fine adjustments such as changing the diameter of the punched hole.
（8）The main body material is SUS316L, and mesh material is SUS316.