Y-type straineres (with sight glass)　【Type YS】　ストレーナ・Cyclone (for fluid)　アクセサリー　Osaka Sanitary Co., Ltd.
Home >> Products >> Accessories >> Strainers,Cyclone For Fluid >> Y-type straineres (with sight glass)　【Type YS】

Y-type straineres (with sight glass)　【Type YS】


     


※Standard surface finish : buff finish(#320 to #400)for internal surface / shot blast finish for external surface
※Those without sight glass can be manufactured as an option.
※Standard fitting: Ferrule,Screw
※Care about pressure loss etc. is needed for except standard production.


Nom.size ID A B L Size of glass Filter are(cm2) Mass kg
1.0S 23 36 83 150 1.5S 37 1.2
1.5S 35.7 56 109 190 2.0S 96 1.5
2.0S 47.8 70 129 220 2.5S 160 2.7
2.5S 59.5 80 149 250 3.0S 248 4.1
3.0S 72.3 110 184 320 4.0S 373 7.4

Mesh selection（Standard）
※Since specifications differ except standard, please contact us
Mesh Aperture size(μm) P.D.Press. (MPa)
20 920 0.2
30 557
40 415
50 318
60 273 0.1
80 198
100 154
150 109 0.05
●Main material : SUS316L Filter
Material : SUS316
Gasket material: FKM

Standard
Option
Punching& Wire net Punching Punching&Sintered Wirre net

（1）Preparation of mesh filters other than specified in the above is not available.
（2）Inappropriate backwashing may damage filters. Please follow the Instruction Manual accordingly.
（3）Please refer to the mesh selection to obtain data for operational differential pressure.
（4）Ensure that the flow direction indicated in the drawing be followed unless otherwise specified.
（5）L-type strainer filters come in sintered metal mesh with punching treatment.
（6）Y-type strainer filters are treated by punching.
（7）Depending on the specifications, it may be necessary to make fine adjustments such as changing the diameter of the punched hole.
（8）The main body material is SUS316L, and mesh material is SUS316.